Laserfiche WebLink
<br />. 8. Minimum landscaping requirements shall <br />relate to the gross square footage of all <br />floors of a building and the building <br />height and shall be expressed as the <br />minimum number of total caliper inches <br />required per building site. <br /> <br />a. Minimum total caliper inches = gross <br />square footage of all floors of <br />bulding divided by 320. <br /> <br />b. The minimum total caliper inches shall <br />contain the following minimum <br />percentages of trees in various size <br />ranges: <br /> <br />Bldg. Percentage of Trees of <br />Height Various Caliper Inches <br />(in <br />stories) 2.0" 3.5" 4.5" <br />to to to <br />3.0" 4.0" 5.0" <br /> <br />1 to 2 70 20 10 <br />3 to 4 50 30 20 <br />5 and <br />. over 30 50 20 <br /> <br />c. Coniferous trees may be considered <br />equivalent to the sizes shown by <br />dividing the coniferous tree height in <br />feet by 2.4. <br /> <br />4. Amend section H(6) (f), as follows: <br /> <br />(6) Development Standards. <br /> <br />(f) Building Exteriors: <br /> <br />The appearance of buildings is an important <br />visual component in accomplishing the stated <br />purpose of the GB District. Accordingly, the <br />following standards shall apply to any building <br />or structure to be constructed within the GB <br />District: <br /> <br />1. All exterior wall finishes on any principle <br />or accessory building shall be one of, or a <br />combination of, the following: <br /> <br />a. Face brick. <br /> <br />. b. Natural or cut stone. <br />