07-22-24-R - Laserfiche WebLink

Home Browse Search

The table below provides the performance standards for the B-2 Zoning District and the preliminary analysis for the proposed development of the principal structure and the site: Ordinance Requirements B-2 Zoning District Proposed Development Standards Maximum Floor Area 0.8 .17 (existing) Ratio Maximum Structure 45% 17% (existing) Coverage Minimum Landscape Lot 20% 23.34% (proposed) Area Minimum Front Yard 50 feet 48.8 feet (existing) Setback Minimum Rear Yard 20 feet +/- 160 feet (existing) Setback Minimum Side Yard 10 feet (min)/20 feet 19.5 feet/ +/-140 feet Setback total(existing) Minimum Lot Area 13,000 square feet 2.19 acres/94,543 square feet(existing) Maximum Building Height 50 feet 20 feet, 11 7/8" +/- existin 2. Design Standards — Section 1325.05 and 1325.055 A. Exterior Materials — Flexibility Requested At least seventy-five (75) percent of the exterior building materials should be made of brick masonry, tile masonry, natural stone or its synthetic equivalent, decorative concrete plank, transparent glass or any combination thereof. Trim and other accent or decorative features may be metal, wood, split faced block, EIFS, or stucco. Metals shall have a matte finish and have visible corner moldings and trim when used on exterior walls. Undesirable materials include simulated brick, vinyl or aluminum siding, sheet or corrugated metal siding, plain concrete blocks or panels, brightly colored metal roofing or canopies, pre -cast tilt -up walls, and mirrored or reflective glass. Building colors shall be muted. Recommended colors include browns, grays, tans, beiges, and dark or muted green, blues, and reds. Bright or brilliant colors and sharply contrasting colors may be used for only accent purposes occupying a maximum of five percent (5%) of building fagades. The City Council should evaluate the architectural style and building character based on the quality of its design and on its relationship to its surroundings. Site characteristics to be evaluated for this purpose include, but are not limited to, building and landscaping materials, colors, textures, shapes, massing, building components, height, roof -line, and setback. A full plan set of building elevations is included as Attachment G. Staff has provided the review below on building materials as shared by the Applicant in order for the City Council to attain a better understanding of the full scope of their project design. Building Materials — Flexibility Requested The proposed building elevations consist of brick veneer, transparent glass, metal panels, and wood. The Applicant has requested for the brick veneer to be considered preferred materials as the Page 12 of 23