Laserfiche WebLink
<br />. <br /> <br />. <br /> <br />. <br /> <br /> <br />Further Cutback Options <br /> <br />ILtll~c:.ity is stilloutside a comfortable budget, we have outlined a few items that my be <br />consideredfui--furtlier-cut!:lacks-ftomtheeX1sting system-design a.slisted aoove;- . <br /> <br />Item One: Reduce Touch Panel <br /> <br />Reducing the touch panel or "Big Remote" will save about $800 and will reduce the <br />amount of control the staff and presenters have over the system. <br /> <br />Item Two: Less E:s:pensh'e Cameras <br /> <br />The current cameras maintain a quality that is acceptable for cable casting. Savings could <br />be achieved by reducing the cameras to a lower quality camera system. The result of this <br />reduction is a lower quality image to the televised audience. Estimated cost reduction of <br />the two-camera system would be around $4,000. <br /> <br />Item Three: Less Expensive Projector <br /> <br />Cost savings within the project could be achieved by reducing the quality of the large <br />screen projector. The result of these savings is a reduction in the screen brightness and. <br />image quality. The projector will not be able to use higher resolution computer <br />presentations such as CAD files and graphic presentations. The estimated cost reduction <br />by using a less expensive projector is $5,000. <br /> <br />Item Four: Less Expensive Rack Console Option <br /> <br />Cost savings can be achieved by using a simpler rack layout within the control room. <br />The result of this reduction would be essential pieces of equipment in the control room <br />being placed in awkward and potentially difficult locations for the operator. Also, some <br />equipment would not be mOlUlted at all and would simply be placed somewhere in the <br />control rOom. The estimated cost reduction by using a less expensive rack console is <br />$l,500. <br /> <br />Item Five: Redu..ed Cablecast Transitions <br /> <br />Cost savings can be achieved by reducing the cablecast transitions from being able to <br />"fade" between sources to doing only "cuts" between sources. The result is a choppy <br />presentation to the cable cast audience. The estimated cost saving by reducing the cable <br />cast transitions is $4,000. <br /> <br />Electronic Interiors, Inc <br /> <br />8 <br />DRAFT <br /> <br />May 5,1999 <br /> <br />01/6'd LGOO'oN <br /> <br />S~01~31N[ JINO~lJ3l3 <br /> <br />~V99:11 6661 'Ol'^e~ <br />