Laserfiche WebLink
Application Rate Guidelines <br /> How to use the table onpagel7: <br /> 1. Select the row with the appropriate pavement temperature, <br /> temperature trend, and weather conditions. <br /> 2. Select the column that has the type of material you are us- <br /> ing. <br /> 3. Find the box where the row and columns intersect to find <br /> the application rate. These rates are not fixed values, but <br /> rather the middle of a range to be selected and adjusted by <br /> your agency according to your local conditions and experi- <br /> ence. <br /> 4. Compare those values to the calibration chart for your <br /> truck. <br /> 5. Dial the correct setting for the rate indicated on the Applica- <br /> tion Rate Guidelines. <br /> 6. If you are not treating a 24- foot -wide road (typical two -lane <br /> road), adjust the rate as follows: for application on a single <br /> lane, cut rates in half. For an 18- foot -wide road, use 3 A of the <br /> listed rate (Le., multiply rate by 0.75). <br /> 18 <br /> 69 <br />