2003-02-12 CC Packet - Laserfiche WebLink

Home Browse Search

2. WATER MAIN: In order to serve the proposed Peltier Preserve development with City water, it will be necessary to extend new water main from outside the plat. The nearest main is located 350' east of Peltier . Circle, on Mill Road. It is proposed to extend 8" (inside diameter) pipe along Peltier Lake Drive and 6" diameter pipe into the Peltier Preserve plat. Each of the 20 lots in the plat will have a 1" diameter copper service line extended 10' past the right-of-way.. It is recommended that additional water mains be installed with this project, to provide looping of the overall system and fill in gaps. To complete the water system in this section of the city, the following streets would have water installed: Mill Road from Peltier Lake Drive to Prairie Drive Peltier Lake Drive from Peltier Circle to Centerville Road Centerville Road from Peltier Lake Drive to Lakeland Hills Addition Clearwater Drive from Peltier Lake Drive to CDS To minimize disruption to existing streets and the associated cost to repair the pavement, it is proposed to directional drill all new mains outside the Peltier Preserve plat. The mains will be located in grass boulevard areas along each street. Service lines under roads will also be directionally drilled. Numerous holes will be dug in boulevard areas for hydrants, valves, curb boxes and connections, leaving most of the existing roads as is. Some patching of streets will be necessary for specific connections. All established lawns disturbed by the excavations will be restored with sod. All necessary valves and hydrants will be provided for fire protection and maintenance of the water system. Mainline pipe on Mill Road, Peltier Lake Drive and Centerville Road will be 1 A" HDPE (8.68" inside diameter), and are considered "trunk" mains.. Clearwater Drive will have 8" HDPE (6.96" inside diameter), while Peltier Circle will be 6" PVC, both considered "lateral" mams. 4