|
tube. Slide support shall be constructed of 1 5/8" x 11 ga. galvanized tube and 4.6mm galvanized sheet. Tranquility Corner Top Weldment shall be
<br />made from: corner cross member 1, tube rnd 3.500 11ga. glv; corner cross member 2, tube rnd 3.500 11ga. glv; corner cross member 3, tube rnd
<br />2.375 12ga. glv; corner bolt panel 1, 2 and 3, sheet 11ga. galv (3.0mm). Triangle Roof (KODA) shall be constructed of KODA XT 1/4". Corner Leg 1
<br />and 2 shall be constructed of tube rnd 3.500 11ga. glv. All hardware shall be Fastener Style A. The frame assembly shall have a Mira-Cote finish.
<br />The gear spinner shall be constructed from 1/2" Mira-Lene routed gears separated by spacers constructed from 1/4" Mira-Lene. Gears and spacers
<br />are to be assembled onto a M10 threaded rod. Ground level panel weldments shall be constructed of tube 3.500” OD x 11 ga. galvanized tube,
<br />2.375” OD x 10 ga. galvanized, tube 2.375” OD x 12 ga. galvanized tube and 3.0mm (11 ga.) galvanized sheet. Finishes (unless otherwise stated):
<br />The frame assembly and Versalok Fasteners shall have a Mira-Cote ™ finish. Versalok fasteners: All Versalok Fasteners for component
<br />attachment shall be aluminum alloy.
<br />SADDLE SEAT shall be an amazing spinning component that supports the principles of inertia by keeping kids spinning merely by use of body
<br />weight. Entire assembly shall measure 66 5/8" in height, 18 5/8" in width and 16 13/16" in length. The Seat shall be constructed of rotomolded
<br />Rockite which shall be contoured for comfort and include water drain holes. Hand grips shall be molded into the sides. Post Assembly parts -
<br />spindle shaft shall be fully welded to a spacer constructed of 3/8" A36 hot rolled steel plate, which shall be fully welded to a post constructed of 3
<br />1/2" x 13 ga. galvanized steel tubing. A base plate of 11 ga. galvanized sheet steel shall be welded to the bottom of the post to facilitate installation
<br />and retain the post in the concrete footing. Model 945-1 post assembly shall have a 10° bend. Hub Spindle assembly shall comprise a 2,500 lb.
<br />capacity industrial trailer hub with tapered roller bearings. Bearings shall be packed with grease prior to assembly and protected against
<br />contaminants through an elastomeric seal around spindle shaft. All fastening hardware shall be Fastener Style A. The Rockite seat shall have
<br />color molded in. The post assembly and exposed hub surfaces shall be finished in Mira-Cote.
<br />RISK MANAGEMENT SIGN is intended to inform the parents and children that adult supervision is recommended, along with smart play on the
<br />equipment in the play area. Sign shall be constructed of fiberglass embedded, gloss finish, 0.125" thick. Steel frame shall be 2-3/8" OD 12 gauge
<br />galvanized steel tubing, 13 gauge galvanized steel sheet for mounting sign, and 3/8" thick hot rolled steel base plate on each leg. Extension tube
<br />shall be 2.375 12GA GLV-IL X 24' tube round. Hardware shall be stainless steel that requires tooling to install or remove. Frame shall have a Mira-
<br />Cote finish.
<br />WELCOME SIGN The Welcome Sign displays the age range of intended users in English, French Canadian/English (CSA) and Spanish with
<br />single or doubled sided posts. Sign posts, each, shall be constructed of 3-1/2” tube, 13 ga., 1-5/8" tube and plate of 12ga. A-60 Galvannealed
<br />sheet and solid welded. The sign panel shall be a fiberglass embedment sign with an approximate graphics area of 23" and approx. 0.09" thick.
<br />This sign will have a tensile strength of 12,000 psi, a compressive strength of 20,000 psi, a flexural strength of 18,000 psi, an impact strength of 6
<br />ft.lbs/inch notch, a barcol hardness of 50 and a modulus of elasticity of 2,000,000 psi. The sign shall have an excellent resistance to mild acids, a
<br />fair resistance to alkalis and an excellent resistance to solvents. The assembly shall container Fastener Style A hardware. Sign posts shall have a
<br />Mira-Cote finish.
<br />STEERING WHEEL, POST MOUNT shall be designed to provide driving stimulation on any pre-existing deck post. The steering wheel shall be
<br />constructed of a high-density blow-molded polyethylene produced from high performance, U.V. stabilized resins with a comprehensive additive
<br />package. These resins shall be tested in accordance with ASTM testing procedures D-1505, D-1248, D-1693(b), D- 638, D-790 and D-746. Resin's
<br />properties shall exhibit a balance of toughness, rigidity, environmental stress crack resistance and excellent low temperature impact performance.
<br />Wall thickness shall be 1/8". The steering wheel hub cover shall be constructed of injection-molded polypropylene which shall contain U.V. light
<br />stabilizers. The Steering Column shall be constructed of 2-3/8" tube, 12 ga. The assembly shall contain Fastener Style A hardware. The Steering
<br />Column shall have a Mira-Cote finish.
<br />INCLUSIVE WHIRL is a classic style whirl designed for ADA accessibility, containing one ADA compliant parking space and a single seat for
<br />kids or caregivers. Inclusive Whirl decking is level with surrounding surfacing, allowing easy access via wheel chair. Rotating base weldment is
<br />comprised of 2-3/8" x 1/8" thick square steel and 3/16" rolled angle steel. The rotating platform is supported by four, 100mm (4") diameter caster
<br />wheels for smooth operation. Two (2) layer decking system designed to reduce surface temperature of the platform on installations in warmer
<br />climates. The lower layer is comprised of 14ga. solid sheet steel. The upper layer is comprised of 14 ga. perforated sheet steel. Hand rail weldment
<br />is constructed of 1.66 OD 13 ga. galvanized steel tube. Seat is comprised of anti-slip 3/4" thick HDPE sheet plastic. All hardware is 18-8 stainless
<br />steel tamper resistant. In-ground footer frame weldment is comprised of 3" x 3" 11 ga. square steel tubing. Decking upper layer shall be finished in
<br />Mira-Therm. Rotating base, decking lower layer, hand rail, and footer frame shall be finished in Mira-Cote.
<br />SPRING RIDERS WITH C SPRING shall be “C” Spring Riders which provide children traditional rocking horse type movement utilizing two “flat
<br />strip” style springs, each of which has been curved to form a “C” shape. The rider body shall consist of a Rockite figure or mold positive supported
<br />by the body frame. Wall thickness of molded components shall be 3/16” to 1/4”. The body frame shall consist of front and rear supports constructed
<br />of 1-1/2" tube and/or of 2" x 2" x 1/4" angle, a cross member constructed of 1-1/4" pipe, and handholds of 1" tube and/or Gator Grip, a cross brace
<br />of 1-1/2" x 1-1/2" x 3/16" angle and Gator Grip, a mount of 1/4" x 1-1/2" flat or 1/4" plate, and a base and gussets constructed of 7 ga. sheet. Model
<br /># 939 shall be shaped like a space shuttle. Model # 950 shall be shaped like a cas. Model # 950 shall have a race car theme. Model # 952 shall
<br />have a baby dinosaur theme. Model # 960 is shaped like a ladybug, Model #961 is shaped like a bumblebee, Model # 962 is shaped like a
<br />grasshopper, and Model # 963 is shaped like a snail. The “C” springs shall be constructed of 3/8" or 7/16" spring steel, 4" wide by approximately 41-
<br />1/2" long, bent 180 degrees to form a large “C”. Mounting Frame for Model # 963 shall be constructed of one vertical riser of 11 ga. tube welded
<br />between an attachment plate of 3/8” black sheet steel measuring 9” x 12” and two 8” x 2” x 2” x 1/4” base angles. Footrest for Model # 963 shall
<br />consist of a formed 1" tube footrest bar (containing 1” stainless steel plugs closing ends) with two tie bar mounting plates of 1/4” flat solid welded.
<br />Security plates and spacers shall be constructed of 1/4" flat sheet. Anchor bolts shall be 1/2"-13 x 12" mechanically galvanized steel with 2" of
<br />
<br />
|