|
comprised of not less than 40% finely chopped glass fibers and reinforced with polymer coating material. Glass Fibers (in composite core) shall be
<br />specifically designed for use with polyester resin blends and chopped to 3/4" - 1 1/2" lengths. The composite core thickness shall not be less than
<br />1/4" and the polymer outer material thickness shall not be less than 1/8". Minimum physical properties shall be 15,000 psi in tension and 25,000
<br />psi in flexural strength. Leg Supports shall be 3-1/2" tube, 13 ga. solid welded to 1/4" black ASTM A-36 sheet plates. The assembly shall contain
<br />Fastener Style A hardware. Finishes shall have a Mira-Cote finish.
<br />
<br />BELL, POST MOUNT shall be designed to provide noisy, imaginative play to any pre-existing deck post. The Bell Assembly shall consist of a
<br />Bell, A Bell Support, a 7-link Chain, and eyebolt, and Fastener Style A hardware. The Bell shall be constructed of A-60 Galvannealed. The Bell
<br />Support shall be constructed of 1" pipe, Gator Grip. The Bell Chain shall be constructed of 1/4” diameter, 316 stainless steel chain. The Eyebolt
<br />shall be 3/8" diameter zinc plated steel. The Bell shall be assembled to 1" pipe, Gator Grip. The Bell shall have a Mira-Cote finish.
<br />CONCERTO is a line of outdoor musical equipment that allows children of all abilities to experience the joy and benefits of making music.
<br />Designed at a more accessible angle and height, these instruments can be played comfortably by all kids, including those with mobility devices.
<br />Note: Chimes and Vibes must be installed OUTSIDE of the playground area in regions that follow CSA certification; chimes and vibes that are
<br />installed INSIDE of the playground area in regions that follow CSA certification, mallets must not be installed. This is in order to meet playground
<br />compliance since there are several issues with the instruments using mallets that will not meet the guidelines. Weldments shall be galvanized 14 ga.
<br />sheet; Galvanized 3mm sheet; 3/8" black sheet zinc plated; 1/4" black plated; and Galvanized 2" pipe. Plastic Panels shall be 1/2" and 3/4" HDPE
<br />(high density polyethylene) sheets - Cabasas – Vibes. Hardware shall be 18-8 Stainless Steel, Tamper resistant - All Components. Coating shall be
<br />super durable, electrostatically applied powder coat - All Components. Steel Posts shall be 5.00" OD x 11 gauge galvanized steel tubing - Congas
<br />post; 3.50" OD x 13 gauge galvanized steel tubing or 3.500" OD x 11 gauge galvanized steel tubing - Tall Chimes frame - Vibes post - Cabasas post.
<br />Aluminum shall be 6063 Aluminum – Chimes. Congas shall be ABS plastic. Post Caps shall be aluminum.
<br />JUMPING BEAN is a freestanding, vertical component that resembles a stationary pogo stick. The Jumping Bean assembly shall comprise a
<br />lower post assembly constructed of 3" OD x 11 ga., galvanized, solid welded to a 2.125 OD x 11 ga. sleeve, middle post assembly constructed of
<br />3.5 OD x 11 ga. tube solid welded to a 2.125 OD x 11 ga. sleeve, upper post assembly constructed of 3.5 OD x 11 ga. tube with a 3.5" round end
<br />cap mechanically placed in its top end, and two half circle handholds of 1.315 OD x 14 GA A-60 embossed, solid welded to middle post assembly.
<br />A foot plate of 7 ga. sheet shall be attached to a square plastic plate and two plastic half rings atop a steel spring. Entire assembly shall measure
<br />119-3/16" in length and 12" in width. Rods shall be constructed of 5/8” HR round steel.
<br />MINI CITY PLAYHOUSES are designed to be enjoyed by children of all abilities, including autism, developmental delays and those that use
<br />mobility devices. Children can use their imagination, improve strength, agility and mobility. The steel frame shall be constructed from 2" square
<br />tube, 16-gage galvanized steel tubing, 1/4" steel plates. The steel frame (sensory garden wall, traffic light) shall be constructed from 12-gage and
<br />14-gage galvanized steel. The steel roof/end walls shall be constructed from 12-gage galvanized steel plate. The stairs shall be constructed from 12-
<br />gage steel coated with durable, thermoplastic coating. The deck platform shall be constructed from 12-gage steel coated with durable, thermoplastic
<br />coating. The rope shall be 16mm rope with aluminum connector. The steel crawl tube shall be constructed from 14-gage galvanized steel, 8-gage
<br />galvanized steel, 1-1/4" pipe, 13-gage galvanized steel tubing. The steel climber shall be constructed from 1-1/2" pipe, 13-gage galvanized steel
<br />tubing, 8-gage and 1/4" steel plate. The plastic slide shall be 1/2" Mira-Lene bedway, 3/4" Mira-Lene sides. The plastic steps/seat shall be 3/4"
<br />textured Mira-Lene. The plastic walls/ends/panels shall be 3/4" Mira-Lene. The plastic tire shall be Rockite.The skylight (chattery) shall be 1/4"
<br />Koda XT. The skylight ( playhouse, chattery) shall be 3/16" screen printed Lexan. The castings shall be 319 aluminum. The finishes shall be in Mira-
<br />Cote. All fastening hardware shall be Fastener Style A. The shelves shall be constructed from 12-gage steel. The graphic panels shall be 1/4"
<br />fiberglass signs. The dog door/belt bridge shall be 3/8" Flextread. The colored lenses shall be 1/8" acrylic colored panels with 3/16" Lexan covers.
<br />MIRACLE MUSEUM playevents are designed to be enjoyed by children of all abilities, including autism, developmental delays and those that
<br />use mobility devices. Children can use their imagination and enhance creative play. The Miracle Museum playevents may be freestanding, clustered
<br />or grouped with other Miracle Museum playevents. The Spinner Assembly Shall be constructed from 3/4" and 1/2" Mira-Lene routed panels, bronze
<br />bearing and polymer and stainless steel balls inside the spinner and covered by a transparent polycarbonate bubble. The Post Weldment shall be
<br />made from 3/5" x 11ga. galvanized steel tubing, 7 ga. galvanized steel sheet and 3/8" steel plate. The Odyssey Hall Frame Weldments shall be
<br />constructed of tube 3.500 OD x 11 ga. galvanized with tabs and blocks made from SHST GAL 3.0mm (11ga.) and 5/8" mild steel block hanger. The
<br />Cross Members Shall be constructed from tube 2.375 OD x 12 ga. galvanized with tabs and blocks made from SHST GAL 3.0mm (11 ga.) and 5/8"
<br />mild steel block hanger. The Spinners shall be made from rotational molded plastic and 9.5mm (.38") grey textured styrene butadiene rubber (SBR).
<br />The Ropes shall be steel reinforced nylon braided rope with a galvanized foundation steelwork. The Chains shall be 4/O straight link coil chain. The
<br />Odyssey Hall Frame shall have a Mira-Cote finish. The Dynamics Lab Frame Weldments shall be constructed of tube 3.500 OD x 11 ga.
<br />galvanized, tube 2.375 OD x 16 ga. galvanized and SHST GAL 3.0mm (11 ga.). Footings for bolt down version will be made from plate 9.5mm (3/8")
<br />A36 and welded to the main frame. The Mounting Weldments shall be constructed of RDTB ILG 42.2 x 3.0, SHST GAL 3.0mm (11ga.) and tube
<br />1.315 OD x 11 ga. galvanized and used to mount the drum. The weldment for the spinner events shall be constructed of SHST HR 4.5mm (7 ga.)
<br />and 1215 steel. The Router Events shall be constructed from 3/4" sheet laminated HDPE or 1/2" sheet HDPE. The Dynamics Lab Frame shall have
<br />a Mira-Cote finish. The Grand Gallery Frame shall be constructed of 3 1/2" OD x 11 ga. galvanized tube, 2 3/8" OD x 12 ga. galvanized tube, 1 5/8"
<br />x 11 ga. galvanized tube and 3.0mm galvanized sheet. Footings for bolt down version shall be constructed of 3/8" A36 plate, welded. The activities
<br />shall be constructed from 1/2" laminated high-density polyethylene, 3/4" laminated high-density polyethylene, 1/4" translucent colored polycarbonate,
<br />cast alloyed aluminum bells, golf balls, mirrored finish stainless steel, polystyrene high impact static cylinders in red and blue and 1/2" stainless steel
<br />acme threaded rod. The Momentum Corridor Slide sides shall be constructed of 4.6mm galvanized sheet, 3 1/2" x 13 ga. galvanized tube and 25.4 x
<br />14 ga. tube. Slide decks shall be constructed of 2.3mm galvanized sheet. Rollers shall be constructed of 2" aluminum tubing with nitrile bearings on
<br />stainless steel shafts. Slide roof shall be constructed of 4.6mm galvanized sheet, 3.0mm galvanized sheet, 1 7/8" x 11 ga. tube and 1 5/16" x 14 ga.
<br />
<br />
|