Laserfiche WebLink
<br />(b) WHERE INDIVIDUAL MOUNTED LETTERS ARE USED WITHOUT A SIGN BACKGROUND, <br />THE FOREGOING PERCENTAGES WILL APPLY, BUT WILL BE COMPUTED ON THE <br />AREA OF THE TOTAL FACADE BETWEEN THE LINTEL BAR AND THE PARAPET ON A <br />ONE-STOREY BUILDING, OR BETWEEN THE LINTEL BAR AND THE FLOOR LEVEL OF <br />THE FLOOR ABOVE ON A MULTI-STORIED BUILDING. <br /> <br />(c) The frontage factor is relative to each tenant's building frontage facing on each public <br />right-of-way, excluding alleys and serviceways. <br /> <br />(d) Premises fronting on more than one public right-of-way may not combine permissible <br />signs for one frontage with another frontage for the purpose of placing the combined <br />area of signs on One frontage. <br /> <br />(e) Any identification wall signs with non-illuminated leHers up to but not exceeding three <br />inches in height nor four square feet in area are not restricted and may be permiHed in <br />addition to regulated slgnage. <br /> <br /> <br />oof Signs <br />s are divided into the following two main categories: (See Figs. 14 and 15). <br /> <br />CATEGORY 1. <br />Roof signs on buildings which do not <br />exceed 40 feet in height and which are <br />designed for viewing by traffic passing <br />by the sign installation. (Fig. 14). <br /> <br /> <br />I <br />f <br /> <br />./ <br /> <br />Figure 14 <br /> <br />TABLE 2A <br /> <br />CATEGORY\(1) ROOF SIGNS ON BUILDINGS WHICH DO NOT EXCEED 40 FEET IN HEIGHT <br />WITH A SIG/Il DESIGNED FOR ADJACE/IlT TRAFFIC AND ARE LIMITED TO TWO FACES. <br />\ <br /> <br />\ <br /> <br /> <br />Area Per Face <br />In Zones whef8 roof signs <br />permitted but BfS limited <br />10 ON-PREMISE slflns <br /> <br />Area Per Face <br />in Zones where <br />OFF-PREMISE fool signs <br />Bfe permitted <br /> <br />Traffic Speed <br />Permitted <br /> <br />~. <br /> <br />0,' <br /> <br />I <br />, <br /> <br />NON-FREEWAY <br />15 - 20 <br />25.30 <br />35.40 <br />50 <br /> <br />FREEWAY- IENTED \ <br />where sup orting building is in <br />a zone pe mitting root signs <br /> <br />100 sq. ft. <br />150 sq. ft. <br />200 sq. ft. <br />250 sq. ft. <br /> <br />300 sq. ft. <br />300 sq. ft. <br />300 sq. ft. <br />300 sq. ft. <br /> <br />300 sq. ft. <br /> <br />720 sq. ft. <br /> <br />NOTE: :4s sign code requires that roof signs appear as an architectural blade with no visibie <br />struct re, line 01 sight will reduce effective useable area as building height increases (See Table <br />28). Area aliowances, therelore, include thai which would have been seen as structurai sup- <br />p t in mosf former sign codes. <br /> <br />27 <br />