Laserfiche WebLink
posts and 2" x 6" treated studs. All railing studs are fastened with two 3/8" thick 3 1/2 " long <br /> galvanized lag screws at each post joint. Decks and railings are joined together through a one piece <br /> 4 "x 4" treated post and tied in at the bottom of the ramp again with 2" x 6" studs. Railings come <br /> complete with a 2" x 6" Board Stop. Decks are 4' wide and fastened with 1/2" x 6" long <br /> galvanized carriage bolts to the 4" x 4" post and also with 3 1/2" galvanized lag screws to the ramp <br /> frame. Optional corner railings and 6' wide decks are also available. Thresholds are 15" wide 3/8" <br /> thick plate steel. We use super strong rectangular and square tubing and schedule 40 pipe for grind <br /> rails and coping. Angle iron is also set on all ramp edges where grinding is possible. Our ramps <br /> are safe, solid, dependable, and built to last! <br /> SkateLite Pro® Skating Surface: <br /> We use 1/4" thick SkateLite Pro® for the final surface layer on all decks and skating surfaces. All <br /> TrueRide ramps are priced using this preferred material. SkateLite Pro® is the industry standard <br /> for outdoor wood and steel framed skate parks and is impervious to water, has UV protection, and <br /> is very long lasting. All skating surfaces, including decks, are covered with one layer of 130 tar <br /> paper as a vapor barrier and underlayment for the SkateLite Pro®. Color choices for SkateLite <br /> Pro® are black, almond, and brown. <br /> On Time Delivery: <br /> We don't mark -up shipping costs and we use a reliable and affordable transport company. <br /> Installation and delivery prices are determined by size of the entire skate park and are not included <br /> in the TrueRide 2000 price list. <br /> Professional Installation: <br /> We have an experienced assembly and installation crew that will correctly install your TrueRide <br /> skate park. We construct all ramps at our facility in Minnesota in sections. Our professional crew <br /> will meet the delivery truck, carefully unload the individual ramps and materials, and install your <br /> custom skate park. Our ramps arrive in sections to your skate park location ready for installation. <br /> Once the ramps are put in place, the decks are attached and railings are constructed on site. We <br /> also install the thresholds and coping on location. A 130 tar paper vapor barrier and SkateLite <br /> Pro® in the color of your choice are then installed to complete each ramp. Depending on the <br /> number of ramps, installation can take from one day to two weeks. Our installation crew ranges <br /> from two to six experienced TrueRide employees who will ensure the equipment is assembled <br /> accurately and on time. <br /> Minimum Maintenance: <br /> You can expect to have only minimum maintenance on TrueRide skating equipment. Over -built <br /> construction and dependable, quality materials will hold up to the abuses of nature and skaters. <br /> Ramps should be checked visually for exposed screws and wear periodically and we recommend <br /> maintaining all exposed wood. However, daily maintenance will not be an issue on your TrueRide <br /> Skate Park. <br /> Safety First: <br /> Safety is important in this sport and we strive to make every ramp safe. Large decks, wide box <br /> tops, and long landing ramps give the skaters plenty of room to land tricks. Over -built <br /> Ii <br />