2018 03-20 CC PACKET - Laserfiche WebLink

Home

Villas of Gen Lake, Gem Lake, MN Wetland/Outlot Operation & Maintenance Manual Replacement Area/Wetland Monitoring Plan 1Weiland replacement areas and 4utlot limits are illustrated on attached Figures 3 and 4h. 1. CONSTRUCTION & SEEDING NOTES Construction l . Wetland replacement construction shall occur before or concurrent with wetland fill. 2. The contractor shall contact the wetland consultant before construction starts, after grading is completed and before seeding is initiated. 3. Silt fence shall be installed prior to construction and maintained until viable cover has established. Silt fence shall be removed upon final acceptance by the engineer. 4.. Silt fence that is initially installed above wetland replacement areas. shall be moved and. reinstalled at the limits of the wetland buffer or outlot.boundary after wetland replacement areas and outlots are graded (where applicable) and accepted. Any soil ridge left at the initial silt fence Iodation shall be removed. 5. Contractor shall. verify or confirm existing elevations prior to initiating wetland replacement excavation {if applicable}: 6.. Excess excavated soil shall be disposed of outside of wetlands. 7: After consultant approval of the as -built construction survey, the replacement wetlands, upland buffers, and outlot areas. will be prepared and seeded as.described in this plan. Upon completion of seed installation, a site visit will be conducted with the revegetation service provider to.confrm seeding was consistent with the approved plan. Seed Mixture Suppliers. and Approval L. Contractor shall submit seed tags or written certification of native wetland seed mix contents acid suppliers for approval by the wetland consultant prior to installation. 2. Substitutions of seed mixes or seed mix components. must be approved by the wetland consultant. Seedbed. Preparation 1. After completion of final grading, the seedbed shall be prepared and. smoothed to break up root. systems and sail clods so. that the average clump is less than 2 inches in diameter. 2. Prior.to seeding, the contractor shall kill and plow or.disc vegetation that covers more than 20 percent. of the ground in the area to be seeded.