2010-11-09_PR Comm Packet - Laserfiche WebLink

Home

1004.02: R-1 SINGLE-FAMILY RESIDENCE DISTRICTS The R-1 District is designed to be the most restrictive of the residential districts. The intent is to provide for a residential environment of predominantly low to moderate density one-family detached residential structures along with other residentially related facilities that serve the residents in the district or local neighborhood. The net housing density within the district ranges from 1.5 to 4.0 units per acre of developable land with a minimum lot size of 11,000 square feet. The R-1 District is intended for those areas designated as LR, Low Density Residential areas in the Comprehensive Plan. A. Permitted Uses: See Section 1004.015 B. Permitted Accessory Uses: See Section 1004.015 C. Uses Allowed By Conditional Use Permit: See Section 1004.015 and below: 1.The principal structure or building relating to any conditional uses shall not be located less than fifty (50) feet from any adjacent lot in an R district. 2. Daycare facilities, nursery schools, dormitories for educational institutions,provided the principal structure shall not be located less than fifty (50) feet from any adjacent lot in an R district. Provided further that the daycare centers shall provide a minimum of forty (40) square feet of outside play area per child, and provided further that the daycare facility shall have its outside play area properly fenced and screened. D. Dwelling Dimensions And Appearances And Height, Frontage Yard And Lot Area Requirements In R-1 Districts: See Section 1004.016 1. On a lot without a garage, a house shall be situated on the lot to provide adequate space for a two (2)vehicle garage meeting all required setbacks and size limitations. 2. Garages attached to a principal structure shall be constructed in a fully enclosed manner and provide a door capable of admitting and enclosing a standard sized motor vehicle. (Ord. 1287, 8-4-2003) (Correction 06/30/2005) 1004.03: R-2 TWO-FAMILY RESIDENCE DISTRICTS: The R-2 district is designed to predominantly consist of a mix of one and two family attached residential structures along with other residentially related facilities. The net housing density within the district ranges from 4.0 to 8.0 units per acre of developable land with a minimum lot size of 11,000 square feet. The minimum lot area per dwelling unit is 5,500 square feet. The R-2 District is intended for those areas designated as LR Low Density Residential areas or MR Medium Density Residential areas within the Comprehensive Plan. A. Permitted Uses: See Section 1004.015 B. Permitted Accessory Uses: See Section 1004.015 C. Uses Allowed By Conditional Use Permit: See Section 1004.015 D. Height, Frontage, Yard and Lot Area Requirements: See Section 1004.016 (Ord. 1287, 8-4-2003) 1004.04: R-3 GENERAL RESIDENCE DISTRICT: The R-3 district is designed to consist of predominantly multiple family residential structures