Laserfiche WebLink
' �TM <br />,�artners <br />___� <br />June 28, 2006 <br />Thomas Paschke <br />Planning Department <br />2660 Civic Center Drive <br />Roseville, Minnesota 55113 <br />Re: O'Reilly Auto Parts <br />1887 Street <br />WD Project: OAPNS0024 <br />Dear Mr. Paschke: <br />�oston <br />Chicago <br />Columbus <br />Dallas <br />Los Angeles <br />Miami <br />The Following information includes the plan review comments received from the City Planner in <br />relation to the O'Reilly Auto Parts Store mentioned above. Along with �he comments are written <br />responses indicating how the documents wEre revised to comply. The revised items in the <br />documents are detailed as follows: <br />Section 1010.02 D(Exterior Finish) generally supports the allowance of pre-finished <br />metal. However, 1010.02F specifically requires "factory fabricated and finished metal <br />framed panel construction if panel materials are any of those noted above or similar as <br />determined by the City Council". In discussions with :he City Attorney it has been <br />concluded that the use of the exterior finish material will require City Council approval. <br />Response: Please refer to sheet A3 for the pre-finished metal wall panel system. <br />The exterior wall panels will be Butler Mfg. Company "Shadowall" and "Stylwall-II". <br />2. The Development Review Committee letter indicated that refuse and recyclables must be <br />located within the structure or within an attached and roofed enclosure. The plans <br />submitted indicate a detached structure that is not roofed — thus prohibited by Section <br />1010.11 (Trash Handling Equipment). Additionally the proposed trash structure does not <br />meet the required 20 foot setback. <br />Response: The refuse and recyclables area is now enclosed and located out of the <br />20' setback area. Please refer to sheets C2 and C3. <br />No supporting documentation has been provided that would clearly indicate whether the <br />rooftop mechanical units meet the requirements of Section 1010.07 (Rooftop Equipment) <br />or are 100% screened form a property line. The plan does indicate a ground level air <br />conditioning area that is screened — which location and design is supported by the City <br />Code. <br />Response: Please see sheet C2 which indicates a screenecf area for the <br />mechanical units. The RTUs have been removed from the elevation (see sheet A3). <br />909 Lake G�iiolyn Farkv.ay. 5ui:e 600 Irving. TX 75039 _ ._ ._ <br />