Laserfiche WebLink
<br />2.08 Sizes andCaDacities: <br /> <br /> Number Total Filter <br /> Model of Baas Area. Sa. Ft. HODDer Type <br /> 3439-9-8 72 1018 pyramidal <br /> -10 90 1272 pyramidal <br /> -12 108 1527 pyramidal <br /> -14 126 1781 pyramidal or trough <br /> -16 144 2036 pyramidal or trough <br /> -18 162 2290 pyramidal or trough <br /> -20 180 2545 pyramidal or trough <br /> -22 198 2800 pyramidal or trough <br /> -24 216 3054 pyramidal or trough <br /> -26 234 3308 pyramidal or trough <br /> -28 252 3562 pyramidal or trough <br /> -30 270 3817 pyramidal or trough <br /> -32 288 4071 pyramidal or trough <br />3.0 SUDPort structure <br /> <br />support columns are wide flange or angle steel beams with a <br />cap and base plate welded at the ends. Steel angle cross <br />bracing between columns is provided and is to be bolted to the <br />columns. This structure supports the collector at a height <br />that locates the hopper discharge flange 3' above the base <br />line unless otherwise specified. After assembly of this <br />structure on the base pads, the hopper is set in place on the <br />columns and bolted down. <br /> <br />4.0 Hoppers <br /> <br />4.01 pyramidal type hOPDers: <br /> <br />The wall are #12 GA carbon steel and reinforced with <br />carbon steel ribs. There are 4 support lugs on the <br />collector and are installed near the top channel for <br />attachment to the support structure. The valley angle <br />is not less than 55.. All hoppers will be provided with <br />a dust outlet flange and a 18" sq. inspection door. An <br />inlet diffuser is provided in the hopper to prevent a <br />high velocity stream from damaging the bags. <br /> <br />4.02 Trouqh type hoppers: <br /> <br />The walls are #12 GA carbon steel and reinforced with <br />carbon steel ribs. The screw trough itself is 10 GA <br />construction for added durabil i ty . There are support <br />lugs installed near the top channel for attachment to the <br />support structure. The side angle is not less than 60.. <br /> <br />DUSTEX <br /> <br />SPECIFICATIONS <br />MODEL 3400 DUST.COLLECTOR <br /> <br />Engineering <br /> <br />05/01/90 <br /> <br />Page 2 of 32 <br /> <br />Integrated Loss Control, Inc. · (612) 783.9581 <br />