Laserfiche WebLink
<br />· , <br /> <br />Two-Hour Fire Rated Fuel System <br /> <br />Specifications <br /> <br />Single Product - Bottom Load <br />Bullet Proof - Thermo Tank With Pad <br /> <br />10,000 gallon 1/411 steel UL 142 product tank 91 x 211 (capacity ± 3%) <br />3/1611 exterior containment tank - 91611 x 221 <br />81 X 251611 tank support and skid system <br />Overall dimensions 120llH x 114"W x 251611L (excluding working vent) <br /> <br />FACTORY ASSEMBLED SYSTEM INCLUDES: <br /> <br />1 <br />1 <br /> <br />3" thermal ceramic two hour fire rated lining tested per UL 1709 <br />20 gallon weather tight spill container with drain valve and lockable cover per <br />NFPA 30 2':3.3.1 <br />311 bottom load fitting with check valve, gate valve, and locking cap per NFPA 303-7 <br />3" x 20 mesh removable fuel strainer in bottom load fill system <br />Non-electrical shut-off valve (inside tank) to conform to NFPA 302-1 O(c) <br />Stage I vapor recovery system with locking cover <br />Siphon supply line <br />Fire rated interstitial tank monitoring gauge per UL 1709 <br />Emergency vent to conform to NFPA 302-3.5 <br />Manway to product tank with 4" access nipple <br />Product tank emergency vent to conform to NFPA 302-3.5 <br />Interstitial emergency vent to conform with Underwriters Laboratories <br />3" pressure/vacuum working vent to conform to NFPA 30 2-3.4.2 <br />Fusible link fire valve as required by UFC 79.904.(e)2 <br />Explosion proof solenoid valve at tank as required by NFPA 30A 2-1.7 <br />Explosion proof flexible 'Supply line to pump per NFPA 303-1 <br />96" x 4211 x 7" leak containment chamber under pump per NFPA 30A 4-2.1 <br />1211 x 1511 lockable access hatch to containment chamber per NFPA 303-4.2 <br />External product level gauge <br />1/2" interstitial vacuum test port to conform with NFPA 302-8.3.1 <br />Interstitial access coupling at top end of tank per Underwriters Laboratories <br />Lifting lugs <br />20 B:C fire extinguisher as required by UFC 79.908 <br />Wired for selected dispensing system to conform with Ch. 5, <br />Art. 500, NFPA 70 (if installed) <br />Primed with high solids epoxy enamel <br />Painted with 86% reflective polyurethane Amershield paint <br />Labeled as required <br /> <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />1 <br />2 <br />1 <br /> <br />ij'" <br /> <br />2/93 <br /> <br />6.10 <br />