pf_03174 - Laserfiche WebLink

Home

(Updated: December 08, 1999) Districts Established. For the purpose of this zoning code, the city is hereby organized into the following districts: Residential Districts: 1. R-1 SinQle-Familv Residence District. The R-1 District is designed to be the most restrictive of the residential districts. The intent is to provide for a residential environment of predominantly low to moderate density one-family detached residential structures along with other residentially related facilities that serve the residents in the district or local neighborhood. The net housing density within the district ranges from 1,5 to 4.0 units per acre of developable land with a minimum lot size of 11,000 square feet. The R-1 District is intended for those areas designated as LR, Low Density Residential areas in the Comprehensive Plan, 2, R-2 Two Familv Residence District. The R-2 district is designed to predominantly consist of a mix of one and two family attached residential structures along with other residentially related facilities, The net housing density within the district ranges from 4.0 to 8,0 units per acre of developable land with a minimum lot size of 11,000 square feet. The minimum lot area per dwelling unit is 5,500 square feet. The R-2 District is intended for those areas designated as LR Low Density Residential areas or MR Medium Density Residential areas within the Comprehensive Plan, 3. R-3 General Residence District. The R-3 district is designed to consist of predominantly multiple family residential structures along with other residentially related facilities and uses, generally serving as residential zones of transition between non-residential uses or public facilities and low to moderate density single or two-family districts. The net housing density within the district ranges from 10.0 to 22.0 units per acre of developable land and a minimum lot area of 2,800 square feet per unit for two (or more) bedroom dwelling units. The minimum lot size is 11,000 square feet and the maximum building height is three stories, The R-3 District is intended for those areas designated as MR Medium Density Residential areas., or HR High Density Residential areas within the Comprehensive Plan, 4. R-3A Multi-Familv Residence District (Three to Twentv Four units). The R-3A district is designed to be a multi-family district consisting predominantly of buildings three stories and 24 units or less, similarly located as those in an R-3 district. The net housing density within the district ranges from 10,0 to 30.0 units per acre of developable land and a minimum lot area of 2,800 square feet per two (or more) bedroom dwelling units. The minimum lot size is 11,000 square feet. The height limits is 3 stories or 30 feet, whichever is less. The maximum number of units in the structure as well as the height of the structure may be exceeded by issuance of a conditional use permit. The R-3 District is intended for those areas designated as HR High Density Residential areas within the Comprehensive Plan. Page 1 of 5