pf_03174 - Laserfiche WebLink

Home

5. R-4 Three and Four Familv Residence District. The R-4 district is designed to be a multi-family district predominantly for buildings of three to four units, with a maximum two-story height. The minimum lot size is 15,000 square feet. The net housing density within the district ranges from 8,0 to 12.0 units per acre of developable land, The R-4 District is intended for those areas designated as MR, Medium Density Residential areas within the Comprehensive Plan. 6. R-5 Three to Eiqht Familv Residence District. The R-5 district is designed to be a multi-family district predominantly for buildings of three to eight units, with a maximum two-story height. The net housing density within the district of up to 8 units per acre of developable land. The minimum lot area is 15,000 square feet for up to 4 units per structure, after which each additional unit requires an additional 3,000 square feet of minimum lot area. The R-5 District is intended for those areas designated as MR Medium Density Residential areas, or HR High Density Residential areas within the Comprehensive Plan. 7, R-6 Townhouse District The R-6 district is designed to be a common wall attached housing district with 2 story townhomes or rowhouses to be the predominate design type of housing. The maximum height is two-stories. Each unit must have a separate entry and exit. The net housing density within the district is 11 units per acre of developable land and a minimum lot area of 4,000 square feet per unit. No more than 8 dwelling units may be constructed within one structure. The R-6 District is intended for those areas designated as MR Medium Density Residential areas, or HR High Density Residential areas, within the Comprehensive Plan. 8, R-7 Apartment Park District The R-7 district is designed to be a multi-family district for large sites of predominately high-density buildings and apartment complexes of more than 24 units, There is no maximum height. The net housing density within the district varies depending upon the height and number of bedrooms per unit. There is only one existing R-7 development in Roseville, It has 360 units on 21.4 acres (approximately 17 units per acre), The minimum lot area is 20,000 square feet. The R-7 District is intended for those areas designated as HR High Density Residential areas within the Comprehensive Plan. 9. R-8 Mobile Home District The R-8 district is designed for the operation of a mobile home park. New parks or expansion of an existing park must be within an R-8 zone. A mobile home park may have a density of up to 8 units per acre with a minimum lot size of 5,000 square feet. There is only one existing mobile home park in Roseville. It is considered a pre-existing use, It has 108 units on 9 acres (approximately 12 units per acre). The R-8 District is intended for those areas designated as MR Medium Density Residential areas, or HR High Density Residential areas within the Comprehensive Plan. Page 2 of 5