pf_03294 - Laserfiche WebLink

Home

9. Drainage: Off-street parking areas shall be so graded and drained so as to dispose of all surface water. Drainage plans shall be subject to the approval of the City Engineer. (1004.0ID4) E. Minimum Roadway Standards As Related To On-Street Parking. The following minimum dimensional standards shall apply to all existing City and private roadways when newly constructed or reconstructed. All local residential streets must be constructed to a width of thirty-two feet (321) from the face of curb to face of curb. In cases where this width is impractical, the City Council may reduce this dimension, as outlined in the City street width policy. However, for purposes of emergency vehicle access, no street shall be constructed to a width less than twenty four feet (24'). In order to preserve the minimum clear width, parking must be restricted according to subsection A ofthis Section. (1103.021) 1. Signage Requirements: "No parking" signs shall be installed in accordance to the following: (I103.02IA) 32 feet Parking pennitted on both sides of the street (no signs needed). 26-32 feet No parking on one side of the street (signs on one side). 24-26 feet No parking on both sides of the street (signs on both sides). 2. Islands In Cul-De-Sac: As an option, a landscaped island may be constructed in a cul-de-sac. A clear distance of twenty-four feet (24') minimum shall be required between the island and the outer curb. (I 103. 021 F) 3. No physical barriers which would impede the movement of emergency vehicles shall be allowed within the island. In all cases, no parking shall be allowed in cul-de-sacs with landscaped islands. (Ord. 1167, 7-8-1996) (I 103. 021 F) Section 5. Design and Maintenance of Parking and Loading Areas A. The location and specifications for curb cuts and driveways in accordance with this Section shall be a necessary part of the plot plan for the use and structure and must be approved prior to the issuance of a building permit. B. Standards For Size Of Parking Space: Space for a single vehicle shall be nine feet by eighteen feet (9' x 18') or larger, provided up to fifty percent (50%) of the required spaces may be not less than eight feet by eighteen feet (8' x 18') when posted "Compact Vehicles Only". Aisles for ingress and egress shall be provided and shall be a minimum of twenty-four feet (24') in width. (1004. 01 D2)(1005. 01 DI)(1007. 01 FI) C. Standards For Driveways And Parking Lots: The following regulations shall apply to all driveways and aisles in parking lots: (703.04B) 4