Laserfiche WebLink
<br />6.2 The structure must be screened from Victoria Street and Larpenteur Avenue with <br />landscaping, fencing, or a combination thereof. A plan must be submitted with the <br />building permit application and a landscape bond equal to 150% of the landscape cost is <br />required. The plan must include implementation strategies to control ambient noise. <br /> <br />6.3 The structure must take on the exterior appearance and be built with materials similar to <br />that of the office and chapel structures. <br /> <br />6.4 The structure shall be limited to a size of 30 feet by 60 feet or 1,800 square feet of <br />building area. <br /> <br />6.5 A drainage plan must be submitted at the time of building permit application that <br />provides proper information on storm water run-off and management to the Engineering <br />Department for their review and approval. <br /> <br />6.6 The Crematory must meet all applicable Federal. State (Department of Health and <br />Pollution Control Agency) and County building, health and emission, noise. air quality <br />code/standards. <br /> <br />6.7 A revised site plan including dimensioned information must be submitted to the <br />Community Development Department for review and approval prior to building permit <br />issuance. Said plan must include parking stall width and depth, sidewalk and structure <br />dimensions. <br /> <br />6.8 Prior to issuance of a building permit, and within 60 days after approval of the <br />conditional use permit, the conditional use permit must be recorded with the Ramsey <br />County Recorder. <br /> <br />6.9 This conditional use permit shall expire 6 months after approval if a building permit has <br />not been issued (Section 1013.03). <br /> <br />6.10 The Planning Commission and City Council shall review the proiect. its conditions of <br />approval. the number of annual cremations. the hours of operation. noise. and emissions <br />two years after final approval and receipt of license. The City Council may make <br />modifications to the CUP at the time of review based on non-compliance with the terms <br />and conditio~of the proiects approval. <br /> <br />6.11 The applicant must purchase an "ALL Model 2500 Elite" or similar and the applicant must <br />operate at all manufacturers' specifications for emissions and operations. <br /> <br />6.12 There shall be no more than two burners (retorts). <br /> <br />PF3315 RCA (072301) - Page 4 of5 <br />