2016-02-03_PC_Agenda_Packet - Laserfiche WebLink

Home

§1007.02.F All exterior wall finishes on any building must be one or a combination of the 183 No less than 60%;; following materials: face brick, natural or cultured stone, pre-colored or, 184 ,--;; factory stained or stainedonsite textured precast concrete panels, textured concrete block, 185 ;;; stucco, glass, fiberglass, or similar materials In addition to the above materials, accent 186 and no more materials, not exceeding 10% of any exterior building elevation, may include 187 than 40% pre-finished metal, cor-ten steel, copper, premium grade wood with mitered 188 Under no outside corners (e.g., cedar, redwood, and fir), or fiber cement board. 189 circumstances shall sheet metal aluminum, corrugated aluminum, asbestos, iron plain 190 or painted, or plain concrete block be acceptable as an exterior wall material on 191 buildings within the city. Other materials of equal quality to those listed, including the use 192 of commercial grade lap-siding in the Neighborhood Business District, may be approved by 193 the Community Development Department. 194 PC UBLICOMMENT 195 At the time this report was prepared, Planning Division staff has not received any 196 communications from members of the public about the proposal. 197 SPCA UGGESTEDLANNINGOMMISSIONCTION 198 By motion, recommend approval of the text amendments, either as proposed above or as 199 modified, to §1004, 1005, 1006, and 1007 of the City Code pertaining to the use of exterior 200 building materials. 201 AA LTERNATIVECTIONS 202 Pass a motion to table the item for future action. 203 By motion, recommend denial of the proposal. 204 Prepared by: City Planner Thomas Paschke 651-792-7074 | thomas.paschke@cityofroseville.com PROJ0017_Amdt28_RPCA_020316020316 Page 6 of 6