Laserfiche WebLink
RCA Attachment B <br />134 Failureto properly maintain the BMP after notification could result in <br />135 administrative penalties and abatement processes under Chapter 407 and/or <br />136 906 of the City Code. (Ord. 1550,6-4-2018) <br />137 <br />138 Section 2.Wetland Amended. After City Council consideration the Roseville City Code, <br />139 Chapter804 is hereby createdto add and updateWetland Protection Overlay District rules. <br />140 <br />141 CHAPTER 804 <br />142 WETLANDS <br />143 <br />144 SECTION: <br />145 <br />146 804.01Wetland Protection Overlay District <br />147 <br />148 804.01:WETLAND PROTECTION OVERLAY DISTRICT <br />149 <br />150 A.Purpose. <br />151 landtransitionalbetweenterrestrialandaquaticsystemsas definedin <br />152 MinnesotaStatutesSection103G.005,Subdivision19. <br />153 <br />154 B. Applicability.All upland within one hundred (100) feet of the wetland boundary of wetlands <br />155 and those public waters not specifically listed as shoreland shall be considered within the <br />156 Wetland Protection Overlay District\[RJ9\] <br />157 Surface Water Management Plan. <br />158 <br />159 C. Lot Standards.The minimum lot area, width and depth requirements of the underlying land <br />160 use zoning district within this code shall apply provided that not more than 25% of the lot area <br />161 may be included in any wetland area to meet the minimum lot area dimension. <br />162 <br />STRUCTURE SETBACKS FROM WETLAND <br />Type of Water Structure Setback from Water Roads, Driveway, Parking and Other <br />BodyBodyImpervious Surface or Setback <br />1, 22 <br />Wetland50 Ft. 30 Ft. <br />163 <br />164 D.Stormwater treatment.All stormwater must be treated to the water quality standard outlined <br />165 <br />166 Standards before discharged to a wetland. <br />167 <br />168 E.Wetland Buffers.Wetland buffers shall be required for all developments adjacent to a <br />169 wetland whether or not the wetland is located on the same parcel as the proposed development. <br />170(1)Table X\[RJ10\]outlines the no-disturb buffer widthsand minimumsthat must be met: <br />5 <br /> <br />