Laserfiche WebLink
Height <br />The top of the bench seat surface shall be 17 inches (430 mm) minimum and 19 inches (485 mm) <br />maximum above the finish floor or ground. <br />903.6 Structural Strength <br />Allowable stresses shall not be exceeded for materials used when a vertical or horizontal force of 250 <br />pounds (1112 N) is applied at any point on the seat, fastener, mounting device, or supporting structure. <br />903.7 Wet Locations <br />Where installed in wet locations, the surface of the seat shall be slip resistant and shall not accumulate <br />water. <br />