2024_0123_PWETC_Packet - Laserfiche WebLink

Home

Final Draft December 18, 2003 Page 2 of 4 A. Streetlight design Street light type: Cobrahead Cutoff Pole type: Wooden B. Procedure The City will install streetlights at locations that conform to the following qualifying conditions: • Overhead electrical service is available, unobstructed, and no more than one new wooden pole needs to be set, AND • The location is at the intersection of two streets, OR • The location is at the end of a cul-de-sac, OR • The distance between existing streetlights is greater than 600 feet, OR • The location is on a severe curve, either vertically or horizontally, OR • The location is it at a dedicated pedestrian crosswalk. Mid -block lights are desirable, and should be considered for placement if the spacing between existing lights is greater than 600 feet. If the above conditions are met, an individual property owner may circulate a petition in the neighborhood to determine if the light is desired (particularly by those property owners directly adjacent to the proposed light). If 100% consensus is built with property owners within 150 feet of the proposed light, the City staff will work with the electric utility company to install the light. C. Funding This is accomplished administratively, at no charge to the individual property owners. The City annually budgets for these costs, including installation, operation and maintenance. V. Enhanced Street Liehtine When the location, design, or number of requested lights does not meet the "Standard Street Light' qualifying conditions, property owners may request that the City undertake an "Enhanced Street Lighting" project. A. Streetlight design Street light type: Cobrahead Cutoff, Shoebox Pedestrian level light: Lumec L80, Acorn, or Larpenteur (substitutions may be made upon City review and approval of design and manufacturer) Pole type: wooden, aluminum, fiberglass Page 56 of 82