CCP 02262024 - Laserfiche WebLink

Home

89 1. Except as provided for in subsection 802.15.M, any structure designed for or intended 90 to be used for an FSE or FM/P must have a grease interceptor installed prior to 91 discharging any wastewater into a sanitary sewer system. Such grease interceptor must 92 be a minimum 1,000-gallon capacity and comply with all conditions as set forth in the 93 State of Minnesota Administrative Rule 4715 and by the Ramsey County Public Health 94 Department; 95 96 2. Property owners of any new commercial construction structure designed to house 97 multiple tenants on a single parcel shall be responsible to install and maintain a single 98 grease interceptor to serve each individual tenant. If a property owner demonstrates to 99 the Public Works Director that it is not practically possible to install and maintain a 100 single grease interceptor to serve each individual unit located in the structure, in which 101 case the Public Works Director has the discretion to approve a plan for such structure 102 providing for more than one grease interceptor or a combination of grease interceptors 103 and grease traps to service such property, which approval shall be in writing. Said 104 approved plan shall include the minimum number of grease interceptors and grease 105 traps that can reasonably serve the structure and the BMP program shall specifically 106 include service for all approved grease intercepts and grease traps; 107 108 3. The owner of any structure occupied by more than one FSE or FM/P shall be jointly 109 and severally liable with the owner of each FSE or FM/P served by any grease 110 interceptor or any grease trap for the servicing and maintenance of that grease 111 interceptor or grease trap and for any servicing and maintenance of any sanitary sewer 112 system located downstream from said structure to remove any accumulations of FOG 113 therefrom; 114 115 4. The Public Works Director may require existing FSE or FM/Ps and owners of 116 structures in which such FSE or FM/Ps are located which have been identified as 117 introducing FOG in any portion of the sanitary sewer system, and which introduction 118 of FOG, in whole or in combination with other FOG contributors, has been responsible 119 for causing the need for the city to clean such portion of the sanitary sewer system more 120 than twice in a single calendar year to install grease interceptors or other FOG 121 equipment as deemed necessary to comply with this section. Such installation shall be 122 completed and operational within 180 days of notice by the Public Works Director. 123 124 E. Grease interceptors. Maintenance and cleaning of grease interceptors. In the maintaining and 125 routine cleaning of grease interceptors and any other grease control device, the owner of the 126 FSE or FM/P and the owner of the structure in which it is located, if different from the owner 127 of the FSE or FM/P shall be responsible for the proper removal and disposal by appropriate 128 means of the captured material. If not performed by personnel under the direct control and 129 direction of any such owner, such removal and haul shall be performed by currently licensed 130 waste disposal haulers who are licensed for this activity. 131 132 1. Maintenance of grease interceptors shall be performed as frequently as necessary to 133 protect the sanitary sewer system against the accumulation of FOG. Maintenance shall 134 be performed as determined by inspection and application of the 25-percent rule, or at RS160\\1\\928921.v2 Qbhf!215!pg!335