My WebLink
|
Help
|
About
|
Sign Out
Home
CCP 01272025
Roseville
>
City Council
>
City Council Meeting Packets
>
2025
>
CCP 01272025
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
1/29/2025 12:22:08 PM
Creation date
1/29/2025 12:21:42 PM
Metadata
Fields
Template:
Roseville City Council
Document Type
Council Agenda/Packets
Meeting Date
1/27/2025
Meeting Type
Regular
Jump to thumbnail
< previous set
next set >
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
252
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
Attachment 3 <br />183 c. The maximum height of the dynamic display billboard structure shall not <br />184 exceed 50 feet above the grade elevation of I-694 road surface from which the sign <br />185 is to be read, however, the height may be increased if the sign's visibility is <br />186 obstructed by vegetation, a structure or other objects. In situations where <br />187 obstructions are present, the sign height may be increased to 30 feet above the <br />188 height of obstruction. In no case shall the sign height exceed 70 feet above the <br />189 grade elevation unless approved by the city manager. If obstructions are present <br />190 that require a greater sign height, an increase in sign height may be permitted, <br />191 provided the city manager determines the height is needed to view the sign and <br />192 practical difficulties are present. <br />193 (c) Design requirements. <br />194(1)Concealed.All visible sign support columns shall be concealed with an approved <br />195 architectural treatment primarily consisting of natural stone, brick, approved masonry <br />196 panels, stucco or architectural metal. <br />197 (2) Screening. Ground equipment and facilities shall be screened from view using <br />198 landscape materials. <br />199 (3) Message standards. <br />200 a. The images and messages must be static, and the transition from one static <br />201 display to another must be direct and immediate without special effects. <br />202 b. Each image and message displayed must be complete in itself and may not <br />203 continue into a subsequent image or message. \\ <br />204 c. Each image and message shall be displayed with minimum time duration of <br />205 eight seconds before changing to the next image and message. <br />206 (4) Brightness. <br />207 a.Lighting shall be set at a minimum level necessary to provide clear viewing <br />208 from the roadway in which the billboard is intended to be read and shielded to <br />209 minimize glare. <br />210 b.The sign shall be equipped with a dimmer control and photo cell designed to <br />211 measure the ambient lighting conditions and adjust the sign brightness as needed. <br />212 c.The light level shall not exceed 0.3 footcandles above the ambient light <br />213 conditions as measured a horizontal distance 250 feet from the sign face. <br />214 (5) Agreement. If the city approves a permit to install a dynamic display billboard, the <br />215 permit holder, property owner and city shall enter into an agreement that identifies the <br />216 terms, including, but not limited to: <br />217 a.The sign shall display public service announcements allowing the city the <br />218 ability, if the city chooses to participate, at no cost to the city, to provide public <br />219 service messages. <br />220 b.The sign shall be part of the state's public safety alert system if the system is <br />221 operable and incorporates dynamic display billboards. <br />Qbhf!8:!pg!363 <br /> <br />
The URL can be used to link to this page
Your browser does not support the video tag.