CC_Minutes_2010_0726 - Laserfiche WebLink

Home

four units, with a maximum two-story height. The minimum lot size is 15,000 square feet. The net housing density within the district ranges from 8.0 to 12.0 units per acre of developable land. The R-4 District is intended for those areas designated as MR, Medium Density Residential areas within the Comprehensive Plan. A. Permitted Uses: See Section 1004.015 B. Permitted Accessory Uses: See Section 1004.015 C. Uses Allowed by Conditional Use Permit: See Section 1004.015. D. Lot and Building Area and Building Height Requirements and Limitations: See Section 1004.016 (Ord. 1287, 8-4-2003) 1004.07: R-5 THREE-TO EIGHT-FAMILY RESIDENCE DISTRICT: The R-5 district is designed to be a multifamily district predominantly for buildings of three to eight units, with a maximum two-story height. The minimum lot size is 15,000 square feet. The net housing density within the district ranges from 8.0 to 12.0 units per acre of developable land. The R-5 District is intended for those areas designated as MR, Medium Density Residential areas within the Comprehensive Plan. A. Permitted Uses: See Section 1004.015 B. Permitted Accessory Uses: See Section 1004.015 C. Uses Allowed by Conditional Use Permit: See Section 1004.015 D. Lot and Building Area and Building Height Requirements and Limitations: See Section 1004.016 1. For each dwelling unit over four (4) in the R-5 District the minimum lot size shall be increased by three thousand (3,000) square feet. (Ord. 1287, 8-4-2003) 1004.08: R-6 TOWNHOUSE DISTRICT: The R-6 district is designed to be a common wall attached housing district with 2 story townhomes or rowhouses to be the predominate design type of housing. The maximum height is two-stories. Each unit must have. a separate entry and exit. The net housing density within the district is 11 units per acre of developable land and a minimum lot area of 4,000 square feet per unit. No more than 8 dwelling units may be constructed within one structure. The R-6 District is intended for those areas designated as MR Medium Density Residential areas, or HR High Density Residential areas, within the Comprehensive Plan. A. Permitted Uses: See Section 1004.015 and below: Structures housing three (3) or more dwelling units of not more than two (2) stories each and contiguous to each other only by the sharing of common walls, such structures to be of the town or row house type, as contrasted to multiple-dwelling apartment structures. No single structure shall contain in excess of eight (8) dwelling units and each dwelling unit shall have separate two or more individual entrances. B. Permitted Accessory Uses: See Section 1004.015 C. Uses Allowed by Conditional Use Permit: See Section 1004.015 D. Lot and Building Area and Building Height Requirements and Limitations: