ord_1403 - Laserfiche WebLink

Home

• by the Community Development Department for uses that include elements such as service bays on one or more facades. -- . 3. Maximum Building Length:Building length parallel to the primary abutting street shall not exceed 200 feet - - without a visual break such as a courtyard or recessed entry. �- C. Dimensional Standards: Four-sided building design Table1 .2 Minimum lot area 20,000 Square feet Minimum lot width 60 Feet Maximum building height 60 Feet' Minimum front yard building See frontage requirement(e) setback Minimum side yard building 10 Feet setback 40 Feet from residential lot boundary Minimum rear yard building 10 Feet setback 40 Feet from residential lot boundary Minimum surface parking Equal to building setbacks setback a Increased building height allowed as a conditional use. • D. Improvement Area:The improved areas,including paved surfaces and footprints of principal and accessory buildings and structures,shall not exceed 85%of the total development parcel area. E. Frontage Requirement:A development must utilize one or more of the three options below for placement of buildings and parking relative to the primary street: 1. At least 50%of the street frontage shall be occupied by building facades placed within 20 feet of the front lot line.No off-street parking shall be located between the facades meeting this requirement and the street. 2. At least 60%of the street frontage shall be occupied by building facades placed within 65 feet of the front lot line.Only one row of parking and a drive aisle may be placed within this setback area. 3. At least 70%of the street frontage shall be occupied by building facades placed within 85 feet of the front lot line.Only two rows of parking and a drive aisle may be placed within this setback area. 1006.05 Industrial(I) District • A. Statement of Purpose:The Industrial District is designed to provide suitable sites for manufacturing,assembly,processing,