Laserfiche WebLink
City of Arden Hills <br />City Council Meeting for September 28, 2020 <br />P:\Planning\Planning Cases\2020\20-010 4200 Round Lake Road PP PUD\CC Packets <br />Page 4 of 9 <br />2. Chapter 13, Zoning Code Review <br />A. District Provisions 1320.13- Flexibility requested <br />According to City Code Section 1320.13, office uses cannot occupy less than 25 percent of a <br />project's total floor area and not more than 50 percent. In addition, warehousing and wholesaling <br />uses shall not exceed 75 percent of the building in which it is located. While the final tenants are <br />unknown at this time, the Applicant is anticipating to attract a wide variety of light industrial <br />tenants with uses including office, manufacturing, research and development, and/or warehousing. <br />The Applicant is requesting flexibility to increase this requirement for warehousing and <br />wholesaling to 85 percent and the remaining 15 percent dedicated to non-warehouse uses such as <br />a combination of uses including-but-not-limited-to office, manufacturing, production, R&D, lab <br />and/or showroom. <br /> <br />B. Lot Area – Flexibility Requested <br />The proposed Lot 1 is 21.94 acres and Lot 2 is 3.87 acres in size. The Zoning Code requires a <br />minimum lot size of 5 acres in the GB District. Proposed Lot 2 does not meet this requirement. <br />Lot 2 is highly impacted by numerous encumbrances as shown below. It is important to note the <br />developable area of Lot 2 does not change no matter the platted lot size due to the site constraints. <br /> <br />C. Lot Dimensions - Flexibility Requested <br />The City Code requires parcels within the GB District to have a street frontage of at least 100 feet <br />and a lot depth of at least 130 feet. Lot frontage is measured at the minimum front yard setback, <br />which allows buildings to be constructed on a radius, such as on a cul-de-sac or curve. Lot 1 has <br />over 1,400 feet of street frontage along Gateway Boulevard and the minimum lot depth of 326.61 <br />feet. Lot 2 is an existing non-conforming lot with a minimum street frontage width of 50 feet <br />instead of the required 100 feet. The submitted plans are showing a 40 foot street frontage width, <br />the reduction is due to 10 feet being dedicated to the City as ROW as required by the Subdivision <br />code. <br /> <br />