Code of Ordinances - Laserfiche WebLink

Home Browse Search

§ 28-74 ARDEN HILLS CODE measured horizontally from the inside line of the base- ment wall, unless an alternate method is approved by the commissioner. (c) All meter installations shall have a gate valve on the street side of the meter. In no case shall there be more than twelve (12) inches of pipe exposed between the point of entrance through the basement floor and the valve. A gate valve shall also be installed on the house side of the meter. All fittings and pipe shall be red brass or bronze, except that pipe over two (2) inches in diameter may be iron. Gate valves shall be brass one hundred twenty-five (125) pounds standard, except valves larger than two (2) inches may be iron body. There shall also be installed on the house side of the meter gate valve a three-quarter inch side outlet tee I and lu to rovide for future inatallation of a two (2 P g P ) inch air chamber or shock absorber. (Ord. No. 103, § 4.2, 11-13-67; Ord. No. 111, § 4, 12-9-68) Sec. 28-75. Use of fire hydrante. No person shall operate fire hydrants or interfere in any way with the water system without firat obtaining a permit to do so from the commissioner, with the exception of suthorized city employees on city business or fire-fighting peraonnel. Permita may be iasued by the commissioner in accordance with the following procedure, to wit: (a) Permit to use a fire hydrant shall be issued for each individual job or contract, for a minimum of thirty (30) days and for such additional thirty (30) day periods as the commissioner shall determine. The permit ahall atate the location of the hydrant and shall be for the use of that hydrant alone, egcept as otherwise apecified therein. (b) The applicant for a permit shall make an advance cash deposit in such amount as has been established by the council in a resolution adopted thereby. The purpose of the cash deposit is to guarantee payment , Supp. No. 3 1662 `