Laserfiche WebLink
May 3, 2022 <br />Centerville Planning & Zoning Commission <br />Page 9 of 14 <br />RE: Banjo Distribution Center, PUD, Preliminary & Final Plat <br />Architecture & Building Materials <br />The building is proposed to be 44 feet in height. Code allows buildings over 35 feet in height only <br />by CUP and only with increased setbacks. The building is setback significantly from all sides of the <br />site and is well screened with landscaping and fences. The height is not a significant issue. <br />The exterior materials of the building are proposed to be precast concrete panels painted gray, <br />with a colored band at the top - see elevation and oblique view on the next page. There will be <br />glass windows on the front (east) side of the building where the offices are located. The narrative <br />indicates that there are reveals in the concrete panels to lend interest, but what is proposed is <br />essentially a very large gray box with a stripe around the top. The code in Section 156.040 (P) <br />requires: <br />Industrial buildings are required to be constructed of brick, decorative block or approved <br />textured masonry product. Pole barn type buildings are not allowed. Buildings are required <br />to have contrasting architectural features and must be designed to be aesthetically <br />pleasing. <br />The canopy over the van loading area is proposed with a standing seam metal roof to match the <br />colors of the building. The Commission is tasked with reviewing the architecture and building <br />materials as part of the formal review. <br />The applicants have submitted a site plan showing how the van parking area will be outfitted with <br />electric vehicle (EV) charging stations. This may require Planning & Zoning Commission as a site <br />plan review issue at some point in the future. <br />East Elevation (toward 215t Avenue) <br />Partial south Elevation (toward Fairview Street) <br />