|
above, sliding tile panel shall contain 15 moveable, tongue-and-groove tiles with routed numerals constructed of 1/4" thick high-density polyethylene.
<br />In addition to material and specifications detailed in "panels" paragraph above, calypso 3 drum panel shall contain 3 rotational molded drums of low
<br />density polyethylene resin. Each drum is attached to the panel through a cover plate constructed of 11 ga. galvanized steel sheet with a Mira-Cote
<br />finish. In addition to material and specifications detailed in “panels” paragraph above, museum pin panel shall contain polystyrene high impact static
<br />cylinders in red and blue and ½” stainless steel rods. In addition to material and specifications detailed in “panels” paragraph above, museum washer
<br />panel shall contain ½” stainless steel acme threaded rod. In addition to material and specifications detailed in “panels” paragraph above, museum
<br />washer panel shall contain ½” stainless steel acme threaded rod. In addition to material and specifications detailed in “panels” paragraph above,
<br />museum zoetrope shall contain the weldment for the spinner event which shall be constructed of SHST HR 4.5mm (7 ga.) and 1215 steel. The rung
<br />brackets shall be constructed of 1" pipe with bolting tabs of 11 ga. A-60 Galvannealed sheet, all solid welded. The steering wheel on vehicle-themed
<br />panels shall be constructed of a high density polyethylene produced from high performance U.V. stabilized rotational molding grade resins with a
<br />comprehensive additive package. These resins are tested in accordance with ASTM testing procedures D-1505, D-1248, D-1693 (b), D-638, D-790
<br />and D-746. Resin's properties shall exhibit a balance of toughness, rigidity, environmental stress crack resistance and excellent low temperature
<br />impact performance. Wall thickness shall be 1/8". The steering wheel hub cover shall be constructed of injection molded polypropylene which shall
<br />contain U.V. light stabilizers. Model 714-714-11 4 X 4 Panel shall contain two side-by-side steering wheels for cooperative play. Themed for Space
<br />Ship Panel, star brackets will be constructed of 11 ga. HRPO steel and powder coat painted. Each assembly shall contain Versalok Fasteners and
<br />Fastener Style A hardware. The panels and steering wheels shall have molded-in color. Each panel assembly shall have a two-color scheme. The
<br />rung brackets and clamps shall have a Mira-Cote finish. The following information is for below deck panels: The panels shall be constructed of Mira-
<br />Lene with all corners rounded. Panels shall measure 36-1/2" x 40" and shall contain routered designs in several themes. The panel shall be
<br />supported between posts by top and bottom rungs of 1" pipe, each with two tabs of 11 ga. A-60 Galvannealed sheet, solid welded. In addition to
<br />material and specifications detailed in "panels" paragraph above, calypso 3-drum panel shall contain 3 rotational molded drums of low density
<br />polyethylene resin. Each drum is attached to the panel through a cover plate constructed of 11 ga. galvanized steel sheet with a Mira-Cote finish. In
<br />addition to the above materials and specifications, gear panel shall contain a clear polycarbonate cover mechanically fastened over two side-by-side
<br />sets of 1/4" thick gears, to be constructed of high-density polyethylene, which shall turn on nylon bushings, except for black nylon handles and drive
<br />gears which shall turn on bronze bushings. Its opposite side shall contain side-by-side routed finger mazes. Piston panel shall contain a cover,
<br />gears, and knob as described herein, and connecting rod and piston shapes of 1/4" thick high-density polyethylene as well. Its opposite side shall
<br />contain routed designs. In addition to material and specifications detailed in "panels" paragraph above, sliding tile panel shall contain 15 moveable,
<br />tongue-and-groove tiles with routed numerals constructed of 1/4" thick high-density polyethylene. In addition to material and specifications detailed in
<br />"panels" paragraph above, store panel shall contain brackets holding the counter panel on constructed of 7ga. glv bent sheet steel. In addition to
<br />material and specifications detailed in “panels” paragraph above, model museum pin panel shall contain polystyrene high impact static cylinders in
<br />red and blue and ½” stainless steel rods. In addition to material and specifications detailed in “panels” paragraph above, museum washer panel shall
<br />contain ½” stainless steel acme threaded rod. In addition to material and specifications detailed in “panels” paragraph above, museum zoetrope shall
<br />contain the weldment for the spinner event which shall be constructed of SHST HR 4.5mm (7 ga.) and 1215 steel. The rung brackets shall be
<br />constructed of 1" tube with bolting tabs of 11 ga. A-60 Galvannealed sheet, all solid welded. The steering wheel on vehicle-themed panels shall be
<br />constructed of a high density polyethylene produced from high performance, U.V. stabilized rotational molding grade resins with a comprehensive
<br />additive package. These resins are tested in accordance with ASTM testing procedures D-1505, D-1248, D-1693 (b), D-638, D-790 and D-746.
<br />Resin's properties shall exhibit a balance of toughness, rigidity, environmental stress crack resistance and excellent low temperature impact
<br />performance. Wall thickness shall be 1/8". The steering wheel hub cover shall be constructed of injection molded polypropylene which shall contain
<br />U.V. light stabilizers. Model 718-714-11B shall contain two side-by-side steering wheels for cooperative play. Themed for Space Ship Panel, star
<br />brackets shall be constructed of 11 ga. HRPO steel and powder coat painted. Each assembly shall contain Versalok Fasteners and Fastener Style A
<br />hardware. The steering wheel and two-color panels shall have molded-in color. The rungs, clamps, and steel panel shall have a Mira-Cote finish.
<br />ACTIVITY PANEL INSERTS available for Kids’ Choice, Tots’ Choice and Tots’ Choice Expansion. Inserts shall be constructed from a
<br />combination of 1/2” thick high-density polyethylene, 3/4” thick high-density polyethylene, 3/16” thick polycarbonate, linear low-density polyethylene
<br />caps and stainless-steel ball bearings. The inserts shall have interactive, sensory and inclusive play for kids of all abilities including funhouse insert,
<br />very buried insert, a-maze-ing insert, four-the-win insert, magical music insert, hypnotize insert slide & solve insert, RG timer insert, solar explorer
<br />insert, cam chimes insert, 3 bell insert, bongo insert, tongue drum insert, make it rain insert, and tumble cog insert.
<br />SENSORY PANELS FRAME The Free-Standing Sensory Panel is a free-standing system that has activity panels inserted into the standing
<br />face, intended for users 2–12 years old. The free-standing post shall be constructed of 2-3/8” Galvanized 12 Ga. Tube with 2 1.66” 13 Ga.
<br />Galvanized half rings welded to it. A piece of 11 Ga. Galvanized sheet steel mounting ring welded in the center of the 2 half rings. The free standing
<br />bolt down post shall be constructed of 2-3/8” Galvanized 12 Ga. Tube welded to a 3/8” black steel plate welded to it. The free-standing post will have
<br />2 1.66” 13 Ga. Galvanized half rings welded to it. A piece of 11 Ga. Galvanized sheet steel mounting ring welded in the center of the 2 half rings.
<br />Fasteners: The Assembly shall contain Fastener Style A hardware. Finishes: Free Standing Post and Bolt Down shall have a Mira-Cote finish.
<br />
<br />
|