ord_1349 - Laserfiche WebLink

Home

c. Size: The surface area of any temporary sign shall not exceed 75 square feet. This area shall be in addition to permanent, window and other signage allowed elsewhere in this chapter. d. Location: A temporary sign shall be located a minimum of 15 feet from a property line. B. Not Required: A permit is not required for the following sign. 1. One noncommercial sign no larger than 6 square feet and no higher than 6 feet tall may be displayed on any lot in all zoning districts without obtaining a permit. 2. Where this Chapter allows any commercial sign, a noncommercial sign meeting the same size, location, and other standards shall be allowed without obtaining a permit. 3. Signs including electronic message devices within the interior of buildings, or signs which are not intended to be visible beyond the premises on which the signs are located are not subject to the regulations set forth in this Chapter. COrd. 1163, 7-24-1995) 4. Nameplate Signs 5. Construction Signs: Construction signs shall be confined to the site of construction, alteration or repair and shall be constructed of high-quality material maintained in good repair. No more than one sign is permitted on each street frontage the project abuts. The sign shall be removed within 180 days of the date of the issuance of a building permit for the work. A conditional use permit is required for a contractor sign to remain in place longer than allowed by this subsection. Construction signs are allowed in zoning districts in accordance with the following criteria: ZONING DISTRICT R-l & R-2 SIZE HEIGHT PLACEMENT/SETBACK 16 sq. ft. 8 foot maximum 5 feet from property line/zero if attached to security fence 12 foot maximum 5 feet from property line/zero if attached to security fence All other Districts 32 sq. ft. per street fronta~e - 11 -