Laserfiche WebLink
<br />the base shall be painted with two finish coats of <br />vinyl (Napko 5450 or approved equal). The floor shall <br />be finished in light gray lacquer to give a skid <br />resistant surface. <br /> <br />4 . Colors: <br /> <br />a. Interior walls, ceiling, and exterior shall be <br />white vinyl. <br /> <br />b. Inside equipment shall be of the vendor's standard <br />gray finish. <br /> <br />5. One quart of touch up paint of each color shall be <br />provided with the structure. <br /> <br />~ Buildinq Electrical. <br /> <br />1. All electrical equipment and material used shall <br />conform to applicable sections to the current IEEE, <br />ANSI, and NEMA standards. The installation shall be <br />according to the latest National Electrical Code, <br />National Electrical Safety Code, and all applicable <br />sections of state and municipality code and <br />regulations. <br /> <br />2. Rigid hot dip galvanized conduit shall be used in all <br />conduit runs. <br /> <br />3. When limited movement of equipment is necessary, or if <br />any vibration is present, a short length (3'0" maximum) <br />of liquid-tight flexible metal conduit shall be used. <br /> <br />4. Wire for general use shall be #14 type THHN/THWN, 600 <br />volt single conductor, stranded copper with class B <br />stranding. wire protected by circuit breakers greater <br />than 15 amp as designated on the drawings shall be <br />sized in accordance with the national electric code <br />guidelines considering type of wire and routing. <br /> <br />5. All wiring and device boxes shall be cast with threaded <br />hubs, Crouse-Hinds type FS and FD. <br /> <br />6. Receptacles for general usage shall be 125 V 20A, <br />duplex type,3 wire grounding type, GFI type, Hubbell <br />catalog No. 5362. Receptacles shall be provided at <br />convenient locations. <br /> <br />7. switches shall be 20 amp. "Y" rated, Hubbell catalog <br />No., 1220 Series. The lighting circuit shall be <br />designed to provide 3-way switching from the doors. <br /> <br />8. Lighting fixtures in the building shall be suitable for <br />