pf_02656 - Laserfiche WebLink

Home

stormwater runoff and erosion, both during and after construction activities; (5) location of lOO-year flood plain areas and floodway districts from existing adopted maps; or data; and (6) a line or contour representing the ordinary high water level, the iltoe" and the "top" of bluffs, and the minimum building setback distances from the top of the bluff and the lake or stream. 7.54 Dedications. When a land or easement dedication is a condition of subdivision approval, the approval must provide easements over natural drainage or ponding areas for management of stormwater and significant wetlands. 7.55 Platting. Al! subdivisions that create five or more lots or parcels that are 2-1/2 acres or Jess in size shall be processed as a pJat in accordance with Minnesota Statutes, Chapter 505, No permit for construction of buildings 8f ii',Jlagi t¡:elttæiRt syetøæs shall be issued for lots created after these official controls were enacted unless the lot was approved as part of a formal subdivision, 7.56 Controlled Access or Recreational Lots. Lots intended as controlled accesses to public waters or for recreational use areas for use by nonriparian lots within a subdivision must meet or exceed the sizing criteria in Section ~ of this ordinance. 7.6 ~ Planned Unit Development Requirements in Shoreland Areas 7.61 Types ofPUD's Permissible Planned unit developments (POOlS) are allowed in shoreland areas for new projects on undeveloped land. redevelopment of previously built sites, or conversions of existing buildings and land, provided they comply with the requirements of this section. 7.62 Processing ofPUD's Planned unit developments must be processed as a conditional use, except that an expansion to an exísting commercial PUÐ involving 6 or less new dwelling units or sites since the date this ordinance was adopted is permissib1e as a pennitted use provided the total project density does not exceed the allowable densities calculated in the project density evaluation procedures in Section Approval cannot occur until the environmental review process (EA W/EIS) is complete. 7.63 Application for a POO The applicant for a PUD must submit the following documents prior to final action being taken on the application request: A. A site plan and/or plat for the project showing locations of property boundaries, surface water features, existing and proposed structures and other facUities, land alterations, and topographic contours at ten~foot interva]s or Jess. When a PUD is a combined commercial and residential development, the site plan and/or plat must indicate and distinguish which BDS,7/19/94 20