ord_1163 - Laserfiche WebLink

Home

C. AGGREGATE SIGNS: Where signs are erected on commercial sites where two (2) or more principal buildings and/or separate uses are located on a single lot, it shall be the responsibility of the owner of the property to allocate the permitted aggregate gross surface areas and sign location between the uses in such a way as to conform with the regulations set forth in this Chapter. D. REAL ESTATE SIGNS: 1. Size and Placement. For the purpose of selling, renting or leasing any property, a sign not in excess of ten (10 square feet in gross surface area per side in residence districts may be placed within the front yard or in the public street right-of-way beyond the front yard. No part of the sign shall be closer than six feet (6') from the curb. If there is a sidewalk, no part of the sign shall be loser than two feet (2') from the edge of the sidewalk. 2. Number of Signs. Only one sign is permitted per lot, except double fronted or through lots may be permitted an additional sign on the second frontage and lots with lakeshore frontage may be allowed an additional sign on the lake side of the lot at least twenty five feet (25') back from the shore line of the lake. 3. Mul tiple- Dwelling Units: For the purpose of selling or promoting a residential property of six (6) or more dwelling units, a two (2) sided sign not to exceed thirty five (35) square feet per side and not more than eight feet (8') in height or a combination of a ground-mounted sign and wall-mounted signs not to exceed seventy (70) square feet may be erected upon the side not less than fifteen feet (15') from a property line. 4. Two-Sided Signs. In all other districts, a two (2) sided sign not to exceed thirty five (35) square feet gross surface area per side and not more than eight feet (8') in height, or a combination of a ground-mounted sign and wall- mounted signs not to exceed seventy (70) square feet may be placed not less than fifteen feet (15') from a property line. 4