Laserfiche WebLink
2. Specific PUD Sketch Plan Submittal Requirements ' <br /> Except as may be waived by the Community Development Department,the following <br /> information shall constitute a complete application for the PUD Sketch Plan: <br /> a. A listing of contact information including name(s), address(es)and phone number(s) <br /> of the owner of record, authorized agents or representatives,the engineer,the <br /> surveyor, and any other relevant associates; <br /> b. A listing of the following site data: address, current zoning,parcel size in acres and <br /> square feet and the current legal description(s); <br /> c. A narrative explaining the applicant's proposed objectives for the PUD, a listing of <br /> the areas of flexibility from standard zoning sought through the use of PUD design, <br /> and an explanation of how the proposal addresses the PUD review criteria in Section <br /> 1023.08; <br /> d. A listing of general information including the number of proposed residential units, <br /> commercial and/or industrial land uses and square footages by category of use,public <br /> use areas including a description of proposed use, and any other land use proposed as <br /> part of the PUD; <br /> e. Calculation of the proposed density of the project and the potential density under <br /> standard zoning regulations, including both gross density and net density accounting <br /> for developable and undevelopable land. Undevelopable land for the purposes of this <br /> calculation shall include all wetlands,floodplain, slopes greater than 18%,poor soils <br /> and areas of concentrated woodlands; <br /> f. The outline of a conceptual development schedule indicating the approximate date <br /> when construction of the project,or stages of the same, can be expected to begin and <br /> be completed(including the proposed phasing of construction of public <br /> improvements and recreational and common space areas);and <br /> g. A PUD Sketch Plan illustrating the nature and type of proposed development. At a <br /> minimum,the plan should show: <br /> i. Area calculations for gross land area; <br /> ii. Existing zoning district(s)on the subject land and all adjacent parcels; <br /> iii. Layout of proposed lots and proposed uses. Denote outlots planned for public <br /> dedication and/or open space; <br /> iv. Area calculations for each parcel; <br /> v. General location of wetlands and/or watercourses over the property and within <br /> 200 feet of the perimeter of the subdivision parcel; <br /> vi. Location of existing and proposed streets within and immediately adjacent to the <br /> subdivision parcel; <br /> Page 7 of 15 <br />