ord_1287 - Laserfiche WebLink

Home

minimum lot area of 2,800 square feet per unit for two (or more) bedroom dwelling units. The minimum lot size is 11,000 square feet and the maximum building height is three stories. The R-3 District is intended for those areas designated as MR Medium Density Residential areas., or HR High Density Residential areas within the Comprehensive Plan. A. Permitted Uses:_See Section 1004.015 B. Permitted Accessory Uses: See Section 1004.015 C. Uses Allowed By Conditional Use Permit: See Section 1004.015 D. Lot Area, Height, Frontage and Yard Requirements: See Section 1004.016 1. Notwithstanding the minimum specifications as specified in Section 1004.016 the front and rear yard setback shall be at least three-fourths (3/4) of the height of the principal structure and the side yard setback shall be at least one-half (112) of the height of the principal structure. (Ord. 500, 8-8- 1966) 2. Storage Space Requirement: A minimum of ninety six (96) cubic feet of miscellaneous storage space shall be provided for each dwelling within the principal structure containing such unit. Such space shall be in addition to normal storage space provided in wardrobes, cabinets and clothes or linen closets. Section 9 Section 1004.05 R-3A MULTI-FAMILY RESIDENCE DISTRICT; THREE TO TWENTY FOUR UNITS is hereby amended as follows: 1004.05: R-3A MULTI-FAMILY RESIDENCE DISTRICT; THREE TO TWENTY FOUR UNITS: The R-3A district is designed to be a multi-family district consisting predominantly of buildings three stories and 24 units or less, similarly located as those in an R-3 district. The net housing density within the district ranges from 10.0 to 30.0 units per acre of developable land and a minimum lot area of 2,800 square feet per two (or more) bedroom dwelling units. The minimum lot size is 11,000 square feet. The height limits is 3 stories or 30 feet, whichever is less. The maximum number of units in the structure as well as the height of the structure may be exceeded by issuance of a conditional use permit. The R-3A District is intended for those areas designated as HR High Density Residential areas within the Comprehensive Plan. A. Permitted Uses: See Section 1004.015 B. Permitted Accessory Uses: See Section 1004.015 C. Uses Allowed By Conditional Use Permit: See Section 1004.015 and below: 1. Multiple-family dwelling structures exceeding three (3) stories or thirty feet (30) in height, whichever is less, or structures designed to exceed twenty four (24) units. (Ord.582, 6-24-1968) D. Lot and Building Area and Building Height Requirements and Limitations: See Section 1004.016 Section 10. Section 1004.06 R-4: TWO AND FOUR-FAMILY RESIDENCE DISTRICT is hereby amended as follows: 1004.06: R-4 TWO AND FOUR-FAMILY RESIDENCE DISTRICT: The R-4 district is designed to be a multifamily district predominantly for buildings of three to four units, with a maximum two-story height. The minimum lot size is 15,000 square feet. The net housing density within the district ranges from 8.0 to 12.0 units per acre of developable land. The R-4 District is intended for those areas designated as MR, Medium Density Residential areas within the Comprehensive Plan. A. Permitted Uses: See Section 1004.015 B. Permitted Accessory Uses: See Section 1004.015 C. Uses Allowed by Conditional Use Permit: See Section 1004.015. D. Lot and Building Area and Building Height Requirements and Limitations: See Section 1004.016 9