ord_1403 - Laserfiche WebLink

Home

• 1005.06 Regional Business(RB) District A. Statement of Purpose:The RB District is designed for businesses that provide goods and services to a regional market area,including regional-scale malls,shopping centers,large-format stores,multi-story office buildings and automobile dealerships.RB Districts are intended for locations with visibility and access from the regional highway system.The district is also intended to: 1. Encourage a"park once"environment within districts by enhancing pedestrian movement and a pedestrian- friendly environment; 2. Encourage high quality building and site design to increase the visual appeal and continuing viability of development in the RB District;and 3. Provide adequate buffering of surrounding neighborhoods. B. Design Standards:The standards in Section 1005.02 shall apply except that ground floor facades that face or abut public streets shall incorporate one or more of the following features along at least 60%of their horizontal length: • a. Windows and doors with clear or slightly tinted glass to allow views in and out of the interior. Spandrel(translucent)glass may be used on service areas; b. Customer entrances; c. Awnings,canopies,or porticoes;and d. Outdoor patios or eating areas. C. Dimensional Standards: 1 Minimum lot area No requirement Maximum building height 65 feet;taller buildings may be allowed as conditional use Minimum front yard building setback No requirement(see frontage requirement below) Minimum side yard building setback 6 feet where windows are located on a side wall or on an adjacent wall of an abutting property 10 feet from residential lot boundary Otherwise not required Minimum rear yard building setback 25 feet from residential lot boundary 10 feet from nonresidential boundary Minimum surface parking setback 5 feet • a Unless greater setbacks are required under Section 1011.12 E.1.of this Title.